Process Control and Instrumentation Stalagmometer is used for the measurement of Surface tension Optical activity Refractive index Kinematic viscosity Surface tension Optical activity Refractive index Kinematic viscosity ANSWER DOWNLOAD EXAMIANS APP
Process Control and Instrumentation Typical specifications for design stipulates the gain margin and phase margin to be respectively > 1.7 and < 30° > 1.7 and > 30° < 1.7 and > 30° < 1.7 and < 30° > 1.7 and < 30° > 1.7 and > 30° < 1.7 and > 30° < 1.7 and < 30° ANSWER DOWNLOAD EXAMIANS APP
Process Control and Instrumentation Emission spectroscopy is used for NOxdetermination Determination of CO₂ in gases Solids and metal analysis Determining water purity NOxdetermination Determination of CO₂ in gases Solids and metal analysis Determining water purity ANSWER DOWNLOAD EXAMIANS APP
Process Control and Instrumentation On-off controllers are normally used for Flow rate changes None of these Low loads Temperature changes Flow rate changes None of these Low loads Temperature changes ANSWER DOWNLOAD EXAMIANS APP
Process Control and Instrumentation Thermal wells used in temperature measurements should have Polished surface Low emissivity High transmissivity of radiation Very thick walls Polished surface Low emissivity High transmissivity of radiation Very thick walls ANSWER DOWNLOAD EXAMIANS APP
Process Control and Instrumentation Flow rate of sludge is not measured by a/an Kennison nozzle Orificemeter Both B & C Open weir Kennison nozzle Orificemeter Both B & C Open weir ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS