Process Control and Instrumentation Stabilising time for the controllers is the time required for the response to reach __________ percent of its ultimate value. 87.5 95 63.2 100 87.5 95 63.2 100 ANSWER DOWNLOAD EXAMIANS APP
Process Control and Instrumentation On-off controllers are normally used for Temperature changes None of these Flow rate changes Low loads Temperature changes None of these Flow rate changes Low loads ANSWER DOWNLOAD EXAMIANS APP
Process Control and Instrumentation In Bode plot, Φ vs ω is plotted on a/an __________ graph paper. Log-log Ordinary Semi-log Triangular Log-log Ordinary Semi-log Triangular ANSWER DOWNLOAD EXAMIANS APP
Process Control and Instrumentation Find the ultimate gain and frequency for a proportional controller in the case of a process having the transfer function Gp(s) = 1/(4s + 1)(2s + 1)(s + 1). W = √(7/6), Kc = 46/3 W = √(7/8), Kc = 45/4 W = 1, Kc = 13 W = 1/√14, Kc = 45/7√14 W = √(7/6), Kc = 46/3 W = √(7/8), Kc = 45/4 W = 1, Kc = 13 W = 1/√14, Kc = 45/7√14 ANSWER DOWNLOAD EXAMIANS APP
Process Control and Instrumentation Characteristic equation is the denominator of __________ loop transfer function. Both A & B Here Neither A Nor B Here Open Closed Both A & B Here Neither A Nor B Here Open Closed ANSWER DOWNLOAD EXAMIANS APP
Process Control and Instrumentation Small furnace draught is accurately measured by an inclined tube manometer, in which the manometric liquid used most commonly is Ethylene glycol Paraffin Water Carbon tetrachloride Ethylene glycol Paraffin Water Carbon tetrachloride ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS