Power Plant Engineering Solar thermal power generation can be achieved by Any of the mentioned system Using focusing collector or heliostates using a solar pond Using flat plate collectors Any of the mentioned system Using focusing collector or heliostates using a solar pond Using flat plate collectors ANSWER DOWNLOAD EXAMIANS APP
Power Plant Engineering U238 will undergo fission by Medium energy neutrons Low energy(slow) neutrons alone High energy(fast) neutrons alone Either fast or slow neutrons Medium energy neutrons Low energy(slow) neutrons alone High energy(fast) neutrons alone Either fast or slow neutrons ANSWER DOWNLOAD EXAMIANS APP
Power Plant Engineering In order to have constant chain reaction to produce a constant rate of heat output, the value of ratio of the number of neutrons in one generation to the number of neutrons in the immediately preceding generation must be Less than 1.0 Greater than 1.0 Equal to zero Equal to 1.0 Less than 1.0 Greater than 1.0 Equal to zero Equal to 1.0 ANSWER DOWNLOAD EXAMIANS APP
Power Plant Engineering Moderator in nuclear plants is used to Control the reaction Extract heat from nuclear reaction Cause collision with the fast moving neutrons to reduce their speed Reduce temperature Control the reaction Extract heat from nuclear reaction Cause collision with the fast moving neutrons to reduce their speed Reduce temperature ANSWER DOWNLOAD EXAMIANS APP
Power Plant Engineering Which of the following nuclear reactor does not need a heat exchanger for generation of steam? Liquid metal cooled Gas cooled Pressurised water Boiling water Liquid metal cooled Gas cooled Pressurised water Boiling water ANSWER DOWNLOAD EXAMIANS APP
Power Plant Engineering Ideally the neutron flux in reactor should be Uniform throughout Zero throughout Maximum in centre and zero at side Maximum at side and zero in canter Uniform throughout Zero throughout Maximum in centre and zero at side Maximum at side and zero in canter ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS