Polymer Technology Silicone resins, which are highly water repellant and has good heat resistance can not be used As room temperature adhesive Resin for lamination As grease & lubricant Hydraulic fluid for heat transfer As room temperature adhesive Resin for lamination As grease & lubricant Hydraulic fluid for heat transfer ANSWER DOWNLOAD EXAMIANS APP
Polymer Technology Melt spinning of polymers involves the forcing of polymer melt through spinnerettes (fine holes) into an atmosphere kept at a temperature lower than the melting point of the polymer, which causes the fine diameter polymer melt to harden into filaments. Melt spinning is not used in case of the __________ fibres. Polypropylene Acrylic Nylon 6:6 Polyester Polypropylene Acrylic Nylon 6:6 Polyester ANSWER DOWNLOAD EXAMIANS APP
Polymer Technology Thermoplastic resins usually Permanent setting resins Can not be reclaimed from waste Less brittle than thermosetting resins Remain hard as long as they are hot Permanent setting resins Can not be reclaimed from waste Less brittle than thermosetting resins Remain hard as long as they are hot ANSWER DOWNLOAD EXAMIANS APP
Polymer Technology Thermocole is a spongy, porous, rigid or flexible foamed plastic, obtained by blowing gas/air through molten Polystyrene Saturated polyester Either B or C Polyurathane Polystyrene Saturated polyester Either B or C Polyurathane ANSWER DOWNLOAD EXAMIANS APP
Polymer Technology Phosphates (e.g., triceresyl, tributyl, tetrabutyl, tripheyl etc.) are added to polymers to act as Hardeners Transparency improver Anti-shrinkage agents Plasticisers Hardeners Transparency improver Anti-shrinkage agents Plasticisers ANSWER DOWNLOAD EXAMIANS APP
Polymer Technology Acrilan fibres used for making cloth, carpet & blankets, which is a hard, horny & high melting polymeric material is nothing but Saturated polyester Polyacrylonitrile Alkyd resin Polyamide Saturated polyester Polyacrylonitrile Alkyd resin Polyamide ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS