Measurement and Instrumentation Schering bridge is used to measure which of the following? Inductance. Frequency. Resistance. Capacitance. Inductance. Frequency. Resistance. Capacitance. ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation Commonly used standard capacitor is Electrostatic type Multiplate parallel plate type Concentric cylindrical type Spherical type Electrostatic type Multiplate parallel plate type Concentric cylindrical type Spherical type ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation A metal strain gauge has a gauge factor of two. Its nominal resistance is 120 ohms. If it undergoes a strain of 10-5, the value of change of resistance in response to the strain is 240 Ohm. 0.0012 Ohm. 120 Ohm. 0.0024 Ohm. 240 Ohm. 0.0012 Ohm. 120 Ohm. 0.0024 Ohm. ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation To measure an A. C. voltage by using an A.C. potentiometer, it is desirable that the supply for the potentiometer in taken From the same source as the unknown voltage Any of the above From a source which is not the same as the unknown voltage From a battery From the same source as the unknown voltage Any of the above From a source which is not the same as the unknown voltage From a battery ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation When checked with an ohm meter an open resistor reads low but not zero. high but within tolerance. zero. infinite. low but not zero. high but within tolerance. zero. infinite. ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation For a circuit given that I = 2 ± 5 % A, R = 100 ± 0.2 % Ω the limiting error in the power dissipation I2 R in the resistor R is 25.2% 1.2% 5.2% 10.2% 25.2% 1.2% 5.2% 10.2% ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS