Process Equipment and Plant Design For a cylinderical vessel of moderate height, the weld joint efficiency for joints parallel to the cylinderical axis is given as 1.0, while for joints along the girth (circumference) it is given as 0.8. In calculating the shell wall thickness using code formula for an internally pressurised cylinderical vessel, what value of weld joint efficiency should be used? 1 0.8 (0.8)0.5 0.9 1 0.8 (0.8)0.5 0.9 ANSWER DOWNLOAD EXAMIANS APP
Process Equipment and Plant Design Excessive liquid gradient on a tray may result in the Gas blowing beneath cap skit All of these Maldistribution of gas Back trapping Gas blowing beneath cap skit All of these Maldistribution of gas Back trapping ANSWER DOWNLOAD EXAMIANS APP
Process Equipment and Plant Design The maximum liquid gradient over a tray must not exceed 0.5" -1.25" 2"-3.5" 5" Half the tray spacing 0.5" -1.25" 2"-3.5" 5" Half the tray spacing ANSWER DOWNLOAD EXAMIANS APP
Process Equipment and Plant Design Safety valves are provided in chemical equipments to guard against excessive Pressure/pressure fluctuation Turbulence Noise Temperature Pressure/pressure fluctuation Turbulence Noise Temperature ANSWER DOWNLOAD EXAMIANS APP
Process Equipment and Plant Design The stress developed in a material without any permanent set is called the Ultimate stress Yield stress Elastic limit Breaking stress Ultimate stress Yield stress Elastic limit Breaking stress ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS