Process Control and Instrumentation Presence of a small amount of water in the organic systems can be determined by the __________ method. Emission spectroscopy Polarimetry Electrical conductivity Dielectric constant end loss factor Emission spectroscopy Polarimetry Electrical conductivity Dielectric constant end loss factor ANSWER DOWNLOAD EXAMIANS APP
Process Control and Instrumentation A control system is unstable, if the open loop frequency response exhibits an amplitude ratio exceeding unity at the crossover frequency. This is __________ criterion. Nyquist Bode stability None of these Routh stability Nyquist Bode stability None of these Routh stability ANSWER DOWNLOAD EXAMIANS APP
Process Control and Instrumentation Pick out the first order system from among the following. Mercury in glass thermometer kept in boiling water Damped vibrator Interacting system of two tanks in series Non-interacting system of two tanks in series Mercury in glass thermometer kept in boiling water Damped vibrator Interacting system of two tanks in series Non-interacting system of two tanks in series ANSWER DOWNLOAD EXAMIANS APP
Process Control and Instrumentation A first order system with unity gain and time constant τ is subjected to a sinusoidal input of frequency w = 1/τ. The amplitude ratio for this system is 0.25 0.5 1/√2 1 0.25 0.5 1/√2 1 ANSWER DOWNLOAD EXAMIANS APP
Process Control and Instrumentation Liquid flow rate in a small channel is best measured by a/an Pitot tube Weir Venturimeter Vane meter Pitot tube Weir Venturimeter Vane meter ANSWER DOWNLOAD EXAMIANS APP
Process Control and Instrumentation An amplitude ratio of 0.1 corresponds to __________ decibels. -20 10 20 -10 -20 10 20 -10 ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS