Materials and Construction Most suitable material for high pressure vessel operating at 500 atm. and 500° C is 18/8 stainless steel Molybdenum stainless steel Mild steel High silicon iron (14% Si) 18/8 stainless steel Molybdenum stainless steel Mild steel High silicon iron (14% Si) ANSWER DOWNLOAD EXAMIANS APP
Materials and Construction The loss of strength in compression which occurs, when there is a gain of strength in tension due to over loading is called Bauschinger effect Relaxation Hooke's effect Hysterisis Bauschinger effect Relaxation Hooke's effect Hysterisis ANSWER DOWNLOAD EXAMIANS APP
Materials and Construction Thermosetting resins are those polymers, which None of these Do not increase in plasticity with rise in temperature Do not take on a permanent set Allow slip to occur between molecules None of these Do not increase in plasticity with rise in temperature Do not take on a permanent set Allow slip to occur between molecules ANSWER DOWNLOAD EXAMIANS APP
Materials and Construction Molybdenum steels containing 0.15 to 0.40% molybdenum Are used for automobile parts like gears, axle, shaft, bearings etc Do not contain nickel or chromium or both Are prone to temper brittleness Have very poor fatigue resistance Are used for automobile parts like gears, axle, shaft, bearings etc Do not contain nickel or chromium or both Are prone to temper brittleness Have very poor fatigue resistance ANSWER DOWNLOAD EXAMIANS APP
Materials and Construction Valves in pipe size of 2" and under are normally made of Brass Monel Bronze Wrought iron Brass Monel Bronze Wrought iron ANSWER DOWNLOAD EXAMIANS APP
Materials and Construction Fatigue failure of a material results from __________ stress. Fluctuating None of these Compressive Tensile Fluctuating None of these Compressive Tensile ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS