Manufacturing And Production Technology Down milling is also called Conventional milling End milling Climb milling Face milling Conventional milling End milling Climb milling Face milling ANSWER DOWNLOAD EXAMIANS APP
Manufacturing And Production Technology The grinding operation is a Dressing operation Forming operation Shaping operation Surface finishing operation Dressing operation Forming operation Shaping operation Surface finishing operation ANSWER DOWNLOAD EXAMIANS APP
Manufacturing And Production Technology The angle made by the face of the tool and the plane parallel to the base of cutting tool is called Clearance angle Lip angle Cutting angle Rake angle Clearance angle Lip angle Cutting angle Rake angle ANSWER DOWNLOAD EXAMIANS APP
Manufacturing And Production Technology In orthogonal turning of a low carbon steel bar of diameter 150 mm with uncoated carbide tool, the cutting velocity is 90 m/min. The feed is 0.24 mm/rev and the depth of cut is 2 mm. The chip thickness obtained is 0.48 mm. If the orthogonal rake angle is zero and the principle cutting edge angle is 90⁰, the shear angle in degree is 20.56 26.56 30.56 36.56 20.56 26.56 30.56 36.56 ANSWER DOWNLOAD EXAMIANS APP
Manufacturing And Production Technology The tool material, for faster machining, should have All of these Toughness Red hardness Wear resistance All of these Toughness Red hardness Wear resistance ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS