Manufacturing And Production Technology In electrochemical machining, the gap between the tool and work is kept as 0.4 mm 0.1 mm 0.35 mm 0.75 mm 0.4 mm 0.1 mm 0.35 mm 0.75 mm ANSWER DOWNLOAD EXAMIANS APP
Manufacturing And Production Technology The hardness of a grinding wheel is determined by the Ability of the grinding wheel to penetrate the work piece Hardness of the bond Hardness of abrasive grains Ability of the bond to retain abrasives Ability of the grinding wheel to penetrate the work piece Hardness of the bond Hardness of abrasive grains Ability of the bond to retain abrasives ANSWER DOWNLOAD EXAMIANS APP
Manufacturing And Production Technology The floating position of the holding fixture in a rotary transfer device is used to Reduce the tendency to over-index Improve the accuracy of location Reduce the cycle time Improve upon the acceleration and deceleration characteristics Reduce the tendency to over-index Improve the accuracy of location Reduce the cycle time Improve upon the acceleration and deceleration characteristics ANSWER DOWNLOAD EXAMIANS APP
Manufacturing And Production Technology The cutting angle of a flat drill varies from 90° to 120° 60° to 90° 3° to 8° 20° to 30° 90° to 120° 60° to 90° 3° to 8° 20° to 30° ANSWER DOWNLOAD EXAMIANS APP
Manufacturing And Production Technology The relief or clearance at the cutting edge of a flat drill varies from 20° to 30° 90° to 120° 3° to 8° 60° to 90° 20° to 30° 90° to 120° 3° to 8° 60° to 90° ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS