Manufacturing And Production Technology Internal gear cutting operation can be performed by Hobbing Milling Shaping with pinion cutter Shaping with rack cutter Hobbing Milling Shaping with pinion cutter Shaping with rack cutter ANSWER DOWNLOAD EXAMIANS APP
Manufacturing And Production Technology Which of the following operations is carried out at a minimum cutting velocity if the machines are equally rigid and the tool work materials are the same? Grinding Boring Milling Turning Grinding Boring Milling Turning ANSWER DOWNLOAD EXAMIANS APP
Manufacturing And Production Technology A diamond locating pin is used in jigs and fixtures because It has a long life It helps in assembly with tolerance on centre distance It occupies very little space Diamond is very hard and wear resistant It has a long life It helps in assembly with tolerance on centre distance It occupies very little space Diamond is very hard and wear resistant ANSWER DOWNLOAD EXAMIANS APP
Manufacturing And Production Technology The percentage of carbon in gray cast iron is in the range of 1.25 to 1.75 percent 3 to 4 percent 8 to 10 percent 0.25 to 0.75 percent 1.25 to 1.75 percent 3 to 4 percent 8 to 10 percent 0.25 to 0.75 percent ANSWER DOWNLOAD EXAMIANS APP
Manufacturing And Production Technology In orthogonal turning of a low carbon steel bar of diameter 150 mm with uncoated carbide tool, the cutting velocity is 90 m/min. The feed is 0.24 mm/rev and the depth of cut is 2 mm. The chip thickness obtained is 0.48 mm. If the orthogonal rake angle is zero and the principle cutting edge angle is 90⁰, the shear angle in degree is 20.56 26.56 36.56 30.56 20.56 26.56 36.56 30.56 ANSWER DOWNLOAD EXAMIANS APP
Manufacturing And Production Technology In a shaper, the metal is removed during Forward stroke Return stroke Neither the forward nor the return stroke Both the forward and return strokes Forward stroke Return stroke Neither the forward nor the return stroke Both the forward and return strokes ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS