Power Systems Inductance of transmission line will decrease when both GMD and GMR increase GMD increase and GMR decrease both GMD and GMR decrease GMD decrease and GMR increase both GMD and GMR increase GMD increase and GMR decrease both GMD and GMR decrease GMD decrease and GMR increase ANSWER DOWNLOAD EXAMIANS APP
Power Systems When a nuclear reaction is operating at constant power the multiplication factor is may be any of the above. greater than 1. 1. less than 1. may be any of the above. greater than 1. 1. less than 1. ANSWER DOWNLOAD EXAMIANS APP
Power Systems Aluminium is now most commonly employed conductor material in transmission lines than copper because costlier its tensile strength is more it is more conductive it is cheaper and lighter costlier its tensile strength is more it is more conductive it is cheaper and lighter ANSWER DOWNLOAD EXAMIANS APP
Power Systems The main objectives of electrical power transmission is/are nether 1 nor 2 Voltage regulation of the transmission line must be zero or minimum Transmission system must be more efficient with minimum line losses both 1 and 2 nether 1 nor 2 Voltage regulation of the transmission line must be zero or minimum Transmission system must be more efficient with minimum line losses both 1 and 2 ANSWER DOWNLOAD EXAMIANS APP
Power Systems If the diameter of the conductor is increased no change in inductance and resistance the inductance is increased the inductance is decreased the resistance is increased no change in inductance and resistance the inductance is increased the inductance is decreased the resistance is increased ANSWER DOWNLOAD EXAMIANS APP
Power Systems In a 400 KV network, 360 KV is recorded at a 400 KV bus. The reactive power absorbed by shunt rated for 50 MVAr, 400 KV connected at the bus is 40.5 MVAr. 45 MVAr. 55.56 MVAr. 61.73 MVAr. 40.5 MVAr. 45 MVAr. 55.56 MVAr. 61.73 MVAr. ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS