Manufacturing And Production Technology In which of the following milling machine, the table can be tilted in a vertical plane by providing a swivel arrangement at the knee? Universal milling machine Plain milling machine Universal milling machine Hand milling machine Universal milling machine Plain milling machine Universal milling machine Hand milling machine ANSWER DOWNLOAD EXAMIANS APP
Manufacturing And Production Technology A solid cylinder of diameter 100 mm and height 50 mm is forged between two frictionless flat dies to a height of 25 mm. The percentage change in diameter is 41.4 2.07 20.7 41.4 2.07 20.7 ANSWER DOWNLOAD EXAMIANS APP
Manufacturing And Production Technology In orthogonal turning of a low carbon steel bar of diameter 150 mm with uncoated carbide tool, the cutting velocity is 90 m/min. The feed is 0.24 mm/rev and the depth of cut is 2 mm. The chip thickness obtained is 0.48 mm. If the orthogonal rake angle is zero and the principle cutting edge angle is 90⁰, the shear angle in degree is 30.56 36.56 26.56 20.56 30.56 36.56 26.56 20.56 ANSWER DOWNLOAD EXAMIANS APP
Manufacturing And Production Technology The in-feed grinding is used to Grind long, slender shafts or bars All of these Produce tapers Grind shoulders and formed surfaces Grind long, slender shafts or bars All of these Produce tapers Grind shoulders and formed surfaces ANSWER DOWNLOAD EXAMIANS APP
Manufacturing And Production Technology In an interchangeable assembly, shafts of size 25.000 -0.010⁺⁰∙⁰⁴⁰ mm mate with holes of size 25.000 -0.020⁺⁰∙⁰³⁰, the maximum interference (in microns) in the assembly is 20 30 10 40 20 30 10 40 ANSWER DOWNLOAD EXAMIANS APP
Manufacturing And Production Technology The tool life is said to be over if There is sudden increase in cutting forces and power consumption Poor surface finish is obtained All of these Overheating and fuming due to heat of friction starts There is sudden increase in cutting forces and power consumption Poor surface finish is obtained All of these Overheating and fuming due to heat of friction starts ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS