Computer Hardware In the Binary numbering system, a (1) represents a jumper being shorted and a (0) represents a jumper being open. On a three-bit jumper block on a SCSI drive, how would an ID of logical 3 be set? 101 11 10 100 101 11 10 100 ANSWER DOWNLOAD EXAMIANS APP
Computer Hardware You are testing the resistance in Ohms of a fuse on a 2 amp system. If the fuse is good, the meter should read? None of these 0.2 2 5 None of these 0.2 2 5 ANSWER DOWNLOAD EXAMIANS APP
Computer Hardware To install a second IDE drive into a computer, you must Set the master-slave jumper to slave on the second drive Verify that you attach the drive to the connector at the end of the ribbon cable Use the IDE configuration software to set the new drive as slave Verify that you define the new drive as D: in the CMOS setup Set the master-slave jumper to slave on the second drive Verify that you attach the drive to the connector at the end of the ribbon cable Use the IDE configuration software to set the new drive as slave Verify that you define the new drive as D: in the CMOS setup ANSWER DOWNLOAD EXAMIANS APP
Computer Hardware What's the best way to prevent damaging your PC with static electricity? wear an ESD wrist strap place your PC on a rubber mat wear leather soled shoes periodically touch a safe ground point on the PC to discharge yourself wear an ESD wrist strap place your PC on a rubber mat wear leather soled shoes periodically touch a safe ground point on the PC to discharge yourself ANSWER DOWNLOAD EXAMIANS APP
Computer Hardware An IRQ allow interface cards to: Pass data to the computers memory Pass data to the CPU to be processed Pass data from one card to another Interrupt the CPU to request service Pass data to the computers memory Pass data to the CPU to be processed Pass data from one card to another Interrupt the CPU to request service ANSWER DOWNLOAD EXAMIANS APP
Computer Hardware What is your first action when windows reports that your hard drive is developing bad sectors? run defrag on the hard drive run scandisk with the "thorough" option None of these replace the hard drive run secclean from dos run defrag on the hard drive run scandisk with the "thorough" option None of these replace the hard drive run secclean from dos ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS