Fuels and Combustion In flue gas analysis by Orsat's apparatus, carbon monoxide is absorbed by None of these Cuprous chloride Potassium hydroxide Alkaline pyrogallol solution None of these Cuprous chloride Potassium hydroxide Alkaline pyrogallol solution ANSWER DOWNLOAD EXAMIANS APP
Fuels and Combustion Bulk density of pulverised coal may be about __________ kg/m³. 100 500 1500 1000 100 500 1500 1000 ANSWER DOWNLOAD EXAMIANS APP
Fuels and Combustion Preheating of combustion air is done to Increase the adiabatic flame temperature Increase the calorific value of the fuel Complete the combustion of fuel Reduce its requirement for effecting the complete combustion Increase the adiabatic flame temperature Increase the calorific value of the fuel Complete the combustion of fuel Reduce its requirement for effecting the complete combustion ANSWER DOWNLOAD EXAMIANS APP
Fuels and Combustion Pitch creosote mixture (PCM) as compared to furnace oil is a better fuel, because its All of these Sulphur content is lower Flue gas has lower dew point thereby facilitating more waste heat recovery Emissivity factor is higher All of these Sulphur content is lower Flue gas has lower dew point thereby facilitating more waste heat recovery Emissivity factor is higher ANSWER DOWNLOAD EXAMIANS APP
Fuels and Combustion Which of the following is a primary fuel? Blast furnace coke Gasoline Wood charcoal Natural gas Blast furnace coke Gasoline Wood charcoal Natural gas ANSWER DOWNLOAD EXAMIANS APP
Fuels and Combustion With increase in C/H ratio of a fuel, the amount of CO₂ formed on its complete combustion Remains same Either A or B, depends on other factors Increases Decreases Remains same Either A or B, depends on other factors Increases Decreases ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS