Measurement and Instrumentation In eddy current damping, disc or former is made of a material that is a Non conductor but magnetic Conductor but non magnetic Conductor but magnetic Non conductor and non magnetic Non conductor but magnetic Conductor but non magnetic Conductor but magnetic Non conductor and non magnetic ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation A sinusoidal signal waveform, when observed on an oscilloscope, has a peak to peak amplitude of 6 cm. If the vertical sensitivity setting is 5 v/cm, then rms value of the voltage will be 15 V. 11.1 V. 10.6 V. 12.6 V. 15 V. 11.1 V. 10.6 V. 12.6 V. ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation For measurement of high direct voltage, one would use _____ voltmeter. Moving iron Hot wire PMMC Electrostatic Moving iron Hot wire PMMC Electrostatic ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation The chemical effect of current is used in C. ammeter C. ammeter hour meter C. energy meter None of these C. ammeter C. ammeter hour meter C. energy meter None of these ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation For measurement of mutual inductance we can use Heavyside bridge Maxwell's bridge Any of the listed here Anderson bridge Heavyside bridge Maxwell's bridge Any of the listed here Anderson bridge ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation The full-scale deflection current of an ammeter is 1 mA and its internal resistance is 100°hm. If this meter is to have full deflection at 5A, what is the value of the shunt resistance to be used? 1/49.99 ohms 2 Ohms 1 Ohm 49.99 Ohms 1/49.99 ohms 2 Ohms 1 Ohm 49.99 Ohms ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS