RL Circuits In a series RL circuit, 12 V rms is measured across the resistor, and 14 V rms is measured across the inductor. The peak value of the source voltage is 20 V 26.0 V 2 V 18.4 V 20 V 26.0 V 2 V 18.4 V ANSWER DOWNLOAD EXAMIANS APP
RL Circuits A 1.2 kΩ resistor is in series with a 15 mH coil across a 10 kHz ac source. The magnitude of the total impedance is 1526Ω 1200Ω 152.6Ω 942Ω 1526Ω 1200Ω 152.6Ω 942Ω ANSWER DOWNLOAD EXAMIANS APP
RL Circuits When the resistor voltage in a series RL circuit becomes less than the inductor voltage, the phase angle is not affected increases cannot be determined decreases is not affected increases cannot be determined decreases ANSWER DOWNLOAD EXAMIANS APP
RL Circuits The voltages in Problem 5 are measured at a certain frequency. To make the resistor voltage less than the inductor voltage, the frequency is doubled not a factor increased decreased doubled not a factor increased decreased ANSWER DOWNLOAD EXAMIANS APP
RL Circuits If the frequency is halved and the resistance is doubled, the impedance of a series RL circuit halves cannot be determined without values remains constant doubles halves cannot be determined without values remains constant doubles ANSWER DOWNLOAD EXAMIANS APP
RL Circuits A 470Ω resistor and a 200 mH coil are in parallel. Both components are across a 1.5 kHz ac source. The total admittance of the circuit, in polar form, is 218 angle –76° mS 12.18 angle 76° mS 12.18 angle –76° mS 12.60 angle –76° mS 218 angle –76° mS 12.18 angle 76° mS 12.18 angle –76° mS 12.60 angle –76° mS ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS