Microwave Communication In a pulsed radar set, the function of the duplexer is to Allow the transmitter and the receiver to operate from a common antenna Aid in calibrating the display unit All of these Prevent frequency drift in the klystron Allow the transmitter and the receiver to operate from a common antenna Aid in calibrating the display unit All of these Prevent frequency drift in the klystron ANSWER DOWNLOAD EXAMIANS APP
Microwave Communication Theoretically electromagnetic radiation field strength varies in inverse proportion to the square of the distance, but when atmospheric attenuation effects and the absorption of the terrain are taken into account the attenuation can be as high as the inverse ___________ power of the distance. Sixth Fifth Fourth Third Sixth Fifth Fourth Third ANSWER DOWNLOAD EXAMIANS APP
Microwave Communication What ferrite device can be used instead of duplexer of isolate microwave transmitter and receiver when both are connected to the same antenna? Isolator Simplex Circulator Magnetron Isolator Simplex Circulator Magnetron ANSWER DOWNLOAD EXAMIANS APP
Microwave Communication A thin layer of dirt and grime coverts the reflecting surface of the parabolic dish of a radar set. The particular effect on the performance of the radar will be No noticeable effect A decrease in range A reduction in horizontal resolution A decrease in gain No noticeable effect A decrease in range A reduction in horizontal resolution A decrease in gain ANSWER DOWNLOAD EXAMIANS APP
Microwave Communication When it is desired that short-range targets be clearly seen on a pulsed-radar set, it is important that the receiver and display system have Low-pass filters A long time constant The restricted high-frequency response The shortest possible time Low-pass filters A long time constant The restricted high-frequency response The shortest possible time ANSWER DOWNLOAD EXAMIANS APP
Microwave Communication If the duration of the radar transmitted pulse, on a particular range of operation, is increased, the required bandwidth of the receiver’s IF amplifiers Must be increased Must be doubled Must remain as before May be decreased Must be increased Must be doubled Must remain as before May be decreased ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS