Electrical Machines If the field connection of a DC Shunt Motor is changed then motor will not run. it will run in same direction by slowly. it will run in opposite direction. it will run in same direction. motor will not run. it will run in same direction by slowly. it will run in opposite direction. it will run in same direction. ANSWER DOWNLOAD EXAMIANS APP
Electrical Machines A DC series motor has which of the following characteristics? Has its field winding consinting of thick wire and less no of turns. Has a poor torque. Has a almost constant speed. Can be started easily without load. Has its field winding consinting of thick wire and less no of turns. Has a poor torque. Has a almost constant speed. Can be started easily without load. ANSWER DOWNLOAD EXAMIANS APP
Electrical Machines For a fault at the terminal of a synchronous generator, the fault current is maximum for a 3 - phase fault. line to line fault. line to ground fault. 3 - phase to ground fault. 3 - phase fault. line to line fault. line to ground fault. 3 - phase to ground fault. ANSWER DOWNLOAD EXAMIANS APP
Electrical Machines In case the conditions for maximum power for DC motor are established, the efficiency of the motor will be Around 100 %. Any where between 75 % and 90 %. Less than 50 % Around 90 % Around 100 %. Any where between 75 % and 90 %. Less than 50 % Around 90 % ANSWER DOWNLOAD EXAMIANS APP
Electrical Machines Consider the following statements regarding the speed control of dc motors : 1. ward-leonard method is suitable forconstant-torque drives 2. Ward-leonard method is suitable for constant-power drives 3. field-control method facilitates speed control below base speed 4. Armature-resistance control method is more efficient than ward-leanard method 5. Field-control method is suitable for constant-torque drives 6. Armature-resistance control method is suitable for constant-torque drives From these, the correct answer is 1, 3, 5 1, 2, 5 1, 4, 6 1, 2, 6 1, 3, 5 1, 2, 5 1, 4, 6 1, 2, 6 ANSWER DOWNLOAD EXAMIANS APP
Electrical Machines If the applied voltage of a DC motor is 230 V, then back emf, for maximum power developed is 200 V. 115 V. 460 V. 230 V. 200 V. 115 V. 460 V. 230 V. ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS