Computer Networking If the ASCII character H is sent and the character I is received, what type of error is this? single-bit multiple-bit burst recoverable single-bit multiple-bit burst recoverable ANSWER DOWNLOAD EXAMIANS APP
Computer Networking The main difference between synchronous and asynchronous transmission is the bandwidth required is different the pulse height is different. None of these the clocking is derived from the data in synchronous transmission the clocking is mixed with the data in asynchronous transmission the bandwidth required is different the pulse height is different. None of these the clocking is derived from the data in synchronous transmission the clocking is mixed with the data in asynchronous transmission ANSWER DOWNLOAD EXAMIANS APP
Computer Networking A network administrator is connecting hosts A and B directly through their Ethernet interfaces, as shown in the illustration. Ping attempts between the hosts are unsuccessful. What can be done to provide connectivity between the hosts?1. A crossover cable should be used in place of the straight-through cable.2. A rollover cable should be used in place of the straight-through cable.3. The subnet masks should be set to 255.255.255.192.4. A default gateway needs to be set on each host.5. The subnet masks should be set to 255.255.255.0. 1 only 3 and 4 only 2 and 5 only 1 and 5 only 2 only 1 only 3 and 4 only 2 and 5 only 1 and 5 only 2 only ANSWER DOWNLOAD EXAMIANS APP
Computer Networking Which of the following types of channels moves data relatively slowly? voiceband channel None of these broadband channel wideband channel narrowband channel voiceband channel None of these broadband channel wideband channel narrowband channel ANSWER DOWNLOAD EXAMIANS APP
Computer Networking You are working with a network that has the network ID 10.9.0.0 and contains 73 networks. In the next year, you will be adding an additional 27 branch offices to your company. For simplified management, you want to keep the most possible hosts per subnet. Which subnet mask should you management, you want to keep the most possible hosts per subnet. Which subnet mask should you use? 255.248.0.0 255.224.0.0 255.240.0.0 255.252.0.0 255.254.0.0 255.248.0.0 255.224.0.0 255.240.0.0 255.252.0.0 255.254.0.0 ANSWER DOWNLOAD EXAMIANS APP
Computer Networking Using the illustration from the previous question, what would be the IP address of SO if you were using the first subnet? The network ID is 192.168.10.0/28 and you need to use the last available IP address in the range. Again, the zero subnet should not be considered valid for this question. 192.168.10.62 192.168.10.127 192.168.10.30 192.168.10.24 192.168.10.62 192.168.10.127 192.168.10.30 192.168.10.24 ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS