Mass Transfer Heat sensitive materials with very high latent heat of vaporisation may be economically separated using Evaporation Absorption Liquid extraction Distillation Evaporation Absorption Liquid extraction Distillation ANSWER DOWNLOAD EXAMIANS APP
Mass Transfer Most important factor to be considered in the selection of packings for absorbers is the __________ of packing. Cost Size Durability Porosity Cost Size Durability Porosity ANSWER DOWNLOAD EXAMIANS APP
Mass Transfer In distillation column design, the McCabe-Thiele procedure is inadequate and a Ponchan-Savarit procedure is needed, when The latent heat of vaporisation of the more and less volatile components are greatly different Saturated feed is not used A total condenser is used An azeotrope forms The latent heat of vaporisation of the more and less volatile components are greatly different Saturated feed is not used A total condenser is used An azeotrope forms ANSWER DOWNLOAD EXAMIANS APP
Mass Transfer Molecular seives are porous Synthetic zeolites crystals/metal alumino-silicates None of these Silica Alumina Synthetic zeolites crystals/metal alumino-silicates None of these Silica Alumina ANSWER DOWNLOAD EXAMIANS APP
Mass Transfer Percentage saturation is __________ the relative saturation. Always greater than None of these Always smaller than Not related to Always greater than None of these Always smaller than Not related to ANSWER DOWNLOAD EXAMIANS APP
Mass Transfer McCabe-Thiele method Uses weight fractions to express liquid and vapour composition Can use any type of units Uses molal units for material and energy balance Is more accurate than Ponchan-Savarit method Uses weight fractions to express liquid and vapour composition Can use any type of units Uses molal units for material and energy balance Is more accurate than Ponchan-Savarit method ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS