Measurement and Instrumentation For measurement of inductance having high value, we should use Maxwell wein bridge Any of the listed here Maxwell's bridge Hay's bridge Maxwell wein bridge Any of the listed here Maxwell's bridge Hay's bridge ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation The circuit in figure is used to measure the power consumed by the load. The current coil and the voltage coil of the wattmeter have 0.02 Ω and 1000 Ω resistance respectively. The measured power compared to the load power will be 0.4 more. 0.2% less. 0.4% less. 0.2% more. 0.4 more. 0.2% less. 0.4% less. 0.2% more. ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation Moving iron instruments have _____ scale. None of the listed here Uniform Log Squared None of the listed here Uniform Log Squared ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation When a capacitor was connected to the terminal of ohmmeter, the pointer indicated a low resistance initially and then slowly came to infinity position. This shows that capacitor is Faulty All right None of these Short-circuited Faulty All right None of these Short-circuited ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation If an inductance L is connected in one arm of bridge and resistance R1, R2, R3 in other three arms The bridge is balanced for some specified value of R1, R2, R3. The bridge is balanced for some specified value of frequency. The bridge can not be balanced. The bridge can be balanced. The bridge is balanced for some specified value of R1, R2, R3. The bridge is balanced for some specified value of frequency. The bridge can not be balanced. The bridge can be balanced. ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation It can be stated that CT operates with a higher flux density than PT CT operates at almost the same flux density as a PT CT operates with considerably lower flux density than a PT No generalisation can be made with regard to the flux densities in CT and PT CT operates with a higher flux density than PT CT operates at almost the same flux density as a PT CT operates with considerably lower flux density than a PT No generalisation can be made with regard to the flux densities in CT and PT ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS