Electrical Machines For a transformer to be tested at full load conditions but consuming only losses from the main, we do None of these back to back test load test OC and SC tests None of these back to back test load test OC and SC tests ANSWER DOWNLOAD EXAMIANS APP
Electrical Machines Two synchronous generators operating in parallel 200 MW and 400 MW respectively. The drooping characteristics of their governors are 4% and 5% from no load to full load. Consider the governors operating at 50Hz on no load. How will the machine share, if the load is 600 MW? None of these generator 1 gets over load 200 MW and 400MW generator 2 gets over load None of these generator 1 gets over load 200 MW and 400MW generator 2 gets over load ANSWER DOWNLOAD EXAMIANS APP
Electrical Machines Transformer action requires a constant magnetic flux. alternating magnetic lux. increasing magnetic flux. alternating electric flux. constant magnetic flux. alternating magnetic lux. increasing magnetic flux. alternating electric flux. ANSWER DOWNLOAD EXAMIANS APP
Electrical Machines In a 3 - Φ wound rotor induction motor the short circuit gear is used to short circuit the None of these starting resistance in the starter. stator phases of the motor. rotor at slip rings. None of these starting resistance in the starter. stator phases of the motor. rotor at slip rings. ANSWER DOWNLOAD EXAMIANS APP
Electrical Machines The damper windings also called the squirrel cage windings or damper grids are provided on the stator for improving power factor. are provided in a synchronous motor to make it self starting. both (A) and (B). consists of short-circuited copper bars embedded in the field pole faces. are provided on the stator for improving power factor. are provided in a synchronous motor to make it self starting. both (A) and (B). consists of short-circuited copper bars embedded in the field pole faces. ANSWER DOWNLOAD EXAMIANS APP
Electrical Machines A 220 ,V 15 , kW 100 rpm shunt motor with armature resistance of 0.25 , W has a rated line current of 68 A and a rated field current of 2.2 A. The change in field flux required to obtain a speed of 1600 rpm while drawing a line current of 52.8 A and a field current of 1.8 A is 36.36% increase 36.36% increase 18.18% increase 36.36% decrease 36.36% increase 36.36% increase 18.18% increase 36.36% decrease ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS