Machine Design Fabric belts are used in industrial applications because They are cheap None of these They are unaffected by moisture and humidity They can work at high temperature They are cheap None of these They are unaffected by moisture and humidity They can work at high temperature ANSWER DOWNLOAD EXAMIANS APP
Machine Design A shaft is subjected to Bending stresses All of these Combined bending and shear stresses Shear stresses Bending stresses All of these Combined bending and shear stresses Shear stresses ANSWER DOWNLOAD EXAMIANS APP
Machine Design In hydrodynamic bearings The oil film pressure is generated only by the rotation of the journal Do not require external supply of lubricant Grease is used for lubrication The oil film is maintained by supplying oil under pressure The oil film pressure is generated only by the rotation of the journal Do not require external supply of lubricant Grease is used for lubrication The oil film is maintained by supplying oil under pressure ANSWER DOWNLOAD EXAMIANS APP
Machine Design The endurance limit of a material with finished surface in comparison to rough surface is Less More or less depending on quantum of load Same More Less More or less depending on quantum of load Same More ANSWER DOWNLOAD EXAMIANS APP
Machine Design The shear stress in a beam varies from zero at the outer fibers to a maximum at the________. Neutral surface Upper surface None of these Lower surface Neutral surface Upper surface None of these Lower surface ANSWER DOWNLOAD EXAMIANS APP
Machine Design Which of the following statement is wrong for a connecting rod? The connecting rod will be equally strong in buckling about X-axis and Y-axis, if Ixx = 4 Iyy If Ixx < 4 Iyy, the buckling will occur about X-axis The most suitable section for the connecting rod is T-section If Ixx > 4 Iyy, the buckling will occur about Y-axis The connecting rod will be equally strong in buckling about X-axis and Y-axis, if Ixx = 4 Iyy If Ixx < 4 Iyy, the buckling will occur about X-axis The most suitable section for the connecting rod is T-section If Ixx > 4 Iyy, the buckling will occur about Y-axis ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS