MGVCL Exam Paper (30-07-2021 Shift 3)
Consider the following statements and choose the correct option. Statement 1: DVR (Dynamic Voltage Restorer) is a series compensation device. Statement 2: DVR protects sensitive electric load from power quality problems such as voltage sags, swells, unbalance and distortion through power electronic controllers." Statement 2: In a synchronous motor, at no-load condition, and with normal excitation the armature current
Dynamic voltage restoration (DVR) is a method of overcoming voltage sags and swells that occur in electrical power distribution. Devices used for DVR include static var devices, which are series compensation devices that use voltage source converters (VSC). The DVR is used to inject three phase voltage in series and in synchronism with the network voltages in order to compensate voltage disturbances with a benefit of active /reactive power control.
1.6 inches = 1.6 inches x 1,000 mils per inch = 1,600 mils 0.25 inch = 0.25 inch x 1,000 mils per inch = 250 mils Area = 1,600 x 250 = 400,000 square mils
The ratio of full load current to short circuit current = 1/6 Xsc = j/(1/6) External reactance required = j*((1/6) - 0.06)) = j*0.106 pu Full load current = (40*1000)/(√3*15) = 1539.6 A Per unit reactance = j*0.106 = (I*Xr)/V j*0.15 = (1539.6*Xb)/((15/√3)*1000)) = 0.60 ohm
Die-electric test on Circuit breaker: These tests are performed to check power frequency and impulse voltage withstand capacity. Power frequency tests are kept on a new circuit breaker, the test voltage changes with a circuit breaker rated voltage. In impulse tests, impulse voltage of particular value is employed to the breaker.
EXAMIANS