Concrete Technology and Design of Concrete Structures Cube strength of controlled concrete to be used for pretensioned and post-tensioned work respectively should not be less than 42 MPa and 35 MPa 35 MPa and 42 MPa 42 MPa and 53 MPa 53 MPa and 42 MPa 42 MPa and 35 MPa 35 MPa and 42 MPa 42 MPa and 53 MPa 53 MPa and 42 MPa ANSWER DOWNLOAD EXAMIANS APP
Concrete Technology and Design of Concrete Structures If the size of panel in a flat slab is 6m x 6m, then as per Indian Standard Code, the widths of column strip and middle strip are 3.0 m and 3.0 m 3.0 m and 1.5 m 1.5 m and 3.0 m 1.5 m and 1.5 m 3.0 m and 3.0 m 3.0 m and 1.5 m 1.5 m and 3.0 m 1.5 m and 1.5 m ANSWER DOWNLOAD EXAMIANS APP
Concrete Technology and Design of Concrete Structures For a slab supported on its four edges with corners held down and loaded uniformly, the Marcus correction factor to the moments obtained by Grashoff Rankine’s theory is always less than 1 can be more than 1 is always greater than 1 can be less than 1 is always less than 1 can be more than 1 is always greater than 1 can be less than 1 ANSWER DOWNLOAD EXAMIANS APP
Concrete Technology and Design of Concrete Structures The effect of creep on modular ratio is to decrease it to increase it to keep it unchanged either to decrease or to increase it to decrease it to increase it to keep it unchanged either to decrease or to increase it ANSWER DOWNLOAD EXAMIANS APP
Concrete Technology and Design of Concrete Structures Workability of concrete is inversely proportional to vater-cement ratio size of aggregate the air in the mix time of transit vater-cement ratio size of aggregate the air in the mix time of transit ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS