Computer Hardware An anti static strap uses a small _____ to make sure you do not become the least path of resistance to the ground? diode None of these capacitor resistor transistor diode None of these capacitor resistor transistor ANSWER DOWNLOAD EXAMIANS APP
Computer Hardware A PC with a 486DX2 processor runs internally at SOMhz. What speed would its external logic be running? None of these 25Mhz 100 Mhz l0Mhz 50Mhz None of these 25Mhz 100 Mhz l0Mhz 50Mhz ANSWER DOWNLOAD EXAMIANS APP
Computer Hardware A keyboard locks up intermittently even when replaced with a new keyboard. What is the LEAST likely cause of the problem? The keyboard controller chip A second bad keyboard None of these The motherboard The keyboard connector The keyboard controller chip A second bad keyboard None of these The motherboard The keyboard connector ANSWER DOWNLOAD EXAMIANS APP
Computer Hardware In laser printer technology, what happens during the conditioning stage? None of these A uniform negative charge is placed on the photosensitive drum A uniform negative charge is placed on the toner The corona wire places a uniform positive charge on the paper All of these None of these A uniform negative charge is placed on the photosensitive drum A uniform negative charge is placed on the toner The corona wire places a uniform positive charge on the paper All of these ANSWER DOWNLOAD EXAMIANS APP
Computer Hardware What resistence in ohms should be displayed ehen testing a speaker in a computer? 0 Ohms Unlimited Ohms -200 Ohms 16 Ohms None of these 0 Ohms Unlimited Ohms -200 Ohms 16 Ohms None of these ANSWER DOWNLOAD EXAMIANS APP
Computer Hardware You have just installed a new internal PCI modem on you desktop. It will not dial out. what is the problem? the phone line is plugged into the line-in port on the modem card The port speed is set too high the modem has not been set up in control panel properties the phone line out of the wall is plugged into the phone port on the modem card None of these the phone line is plugged into the line-in port on the modem card The port speed is set too high the modem has not been set up in control panel properties the phone line out of the wall is plugged into the phone port on the modem card None of these ANSWER DOWNLOAD EXAMIANS APP