Power Systems A thermal generating station has an installed capacity of 15 MW and supplies a daily load of 10 MW for 12 hours and 5 MW for remaining 12 hours. The plant capacity factor for the station is 0.5 0.6 0.75 1 0.5 0.6 0.75 1 ANSWER DOWNLOAD EXAMIANS APP
Power Systems If the fault current is 2000 A, the relay setting is 50% and CT ratio is 400 : 5, then plug setting multiplier will be 50. 10. 15. 25. 50. 10. 15. 25. ANSWER DOWNLOAD EXAMIANS APP
Power Systems Bonding is done at the both ends of the cable to reduce the sheath loss None of these copper loss iron loss sheath loss None of these copper loss iron loss ANSWER DOWNLOAD EXAMIANS APP
Power Systems The value of diversity factor is 0 less than 1 1 greater than 1 0 less than 1 1 greater than 1 ANSWER DOWNLOAD EXAMIANS APP
Power Systems The receiving end voltage for a long line under no load condition is more than the sending end voltage less than the sending end voltage equal to the sending end voltage any of the above more than the sending end voltage less than the sending end voltage equal to the sending end voltage any of the above ANSWER DOWNLOAD EXAMIANS APP
Power Systems In a 3-phase transmission line, each phase is supported by 3 insulated discs, maximum voltage of each disc is 20 kV. Find the operating voltage of the transmission line per phase if efficiency of string is 80.6%. 20 kV 52.84 kV 83.76 kV 48.36 kV 20 kV 52.84 kV 83.76 kV 48.36 kV ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS