Power Systems A power generating station has a plant capacity of 200 MW and maximum power demand is 150 MW. If average power generation is 110 MW, then find the load factor and capacity factor respectively? 0.733 and 0.65 0.65 and 0.55 0.55 and 0.733 0.733 and 0.55 0.733 and 0.65 0.65 and 0.55 0.55 and 0.733 0.733 and 0.55 ANSWER DOWNLOAD EXAMIANS APP
Power Systems An impulse turbine operates by initial complete conversion to kinetic energy. makes use of a draft tube. always operates submerged. is most suited for low head and high discharge power plants. operates by initial complete conversion to kinetic energy. makes use of a draft tube. always operates submerged. is most suited for low head and high discharge power plants. ANSWER DOWNLOAD EXAMIANS APP
Power Systems A 3-phase, 110 kV coaxial XLPE insulated power cable delivering power at 50 Hz, has a capacitance of 125 nF/km. If the dielectric loss tangent of XLPE is 2*10^-4, then dielcetric power loss in this cable in W/km/phase is 23.9 35.45 31.7 38.6 23.9 35.45 31.7 38.6 ANSWER DOWNLOAD EXAMIANS APP
Power Systems Under excited Synchronous phase modifier works as series capacitor any of the above shunt capacitor shunt reactor series capacitor any of the above shunt capacitor shunt reactor ANSWER DOWNLOAD EXAMIANS APP
Power Systems Two generating stations delivering a powers of P1 = 150 MW, P2 =100 MW and the B coefficients are B11 = 0.005, B22 = 0.002, B12=B21= -0.001. Find the transmission line losses? 85.5 102.5 105.2 95.5 85.5 102.5 105.2 95.5 ANSWER DOWNLOAD EXAMIANS APP
Power Systems Transmission line has a length of 300 km, operating at sending end voltage Vs = 1 pu, find the receiving end voltage(Vr) at no load? 1.098 pu 0.098 pu 0.98 pu 1 pu 1.098 pu 0.098 pu 0.98 pu 1 pu ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS