Computer Hardware A PCMCIA measuring 10.5mm is what type? type 2 type 1 and 3 type 3 type 1 None of these type 2 type 1 and 3 type 3 type 1 None of these ANSWER DOWNLOAD EXAMIANS APP
Computer Hardware You are installing an IDE hard drive that will be your boot drive. Which is the correct order of steps that need to be followed? jumper properly, auto-detect(or configure manually) in CMOS, low level format, high level format, partition jumper properly, partition, auto-detect(or configure manually in CMOS, high level format with /s switch jumper properly, partition, low level format, high level format jumper properly, auto-detect in CMOS, regular format jumper properly, auto-detect(or configure manually) in CMOS, partition, high level format with / s switch jumper properly, auto-detect(or configure manually) in CMOS, low level format, high level format, partition jumper properly, partition, auto-detect(or configure manually in CMOS, high level format with /s switch jumper properly, partition, low level format, high level format jumper properly, auto-detect in CMOS, regular format jumper properly, auto-detect(or configure manually) in CMOS, partition, high level format with / s switch ANSWER DOWNLOAD EXAMIANS APP
Computer Hardware To prevent the computer from overheating you should? Remove the slot cover from the back Remove the CPU fan Keep the computer cover closed All of these None of these Remove the slot cover from the back Remove the CPU fan Keep the computer cover closed All of these None of these ANSWER DOWNLOAD EXAMIANS APP
Computer Hardware To install a second IDE drive into a computer, you must Verify that you attach the drive to the connector at the end of the ribbon cable Set the master-slave jumper to slave on the second drive Verify that you define the new drive as D: in the CMOS setup Use the IDE configuration software to set the new drive as slave Verify that you attach the drive to the connector at the end of the ribbon cable Set the master-slave jumper to slave on the second drive Verify that you define the new drive as D: in the CMOS setup Use the IDE configuration software to set the new drive as slave ANSWER DOWNLOAD EXAMIANS APP
Computer Hardware In which mode can two or more applications be stored in memory at the same time? Protected Mode Real Mode None of these Segmented Mode Unprotected Mode Protected Mode Real Mode None of these Segmented Mode Unprotected Mode ANSWER DOWNLOAD EXAMIANS APP
Computer Hardware On a leased line installation a known good external modem shows no carrier detect light. Where is the problem most likely to be? None of these In the phone line In the modem In the DTC equipment In the computer None of these In the phone line In the modem In the DTC equipment In the computer ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS