Electric Circuits A load is connected to an active network. At the terminals to which the load is connected, RTH = 10 Ohm, VTH = 60V. Then maximum power supplied to the load is 60W. 180W. 90W. 360W. 60W. 180W. 90W. 360W. ANSWER DOWNLOAD EXAMIANS APP
Electric Circuits In series RLC circuit what is the power factor just above the resonance frequency? Lagging Zero Unity Leading Lagging Zero Unity Leading ANSWER DOWNLOAD EXAMIANS APP
Electric Circuits If a resistor and an inductor are connected in series across a voltage source. Which two parameters in that circuit increase if frequency of voltage source increases? VL and Z. VL and VR. VL and I. Z and I. VL and Z. VL and VR. VL and I. Z and I. ANSWER DOWNLOAD EXAMIANS APP
Electric Circuits For a band pass filter, cut off frequency of the low pass filter should be ___ of the high pass filter? All of these greater than less than equals to All of these greater than less than equals to ANSWER DOWNLOAD EXAMIANS APP
Electric Circuits The absolute charge of an electron is + 1.6 × 10-19 C. none of above. - 1.6 × 10-19 C. 1.6 × 10-19 C. + 1.6 × 10-19 C. none of above. - 1.6 × 10-19 C. 1.6 × 10-19 C. ANSWER DOWNLOAD EXAMIANS APP
Electric Circuits Constant K type HPF (high pass filter) having cut off frequency 12 KHz and nominal impedance Ro = 500 Ω Find shunt arm inductor L and series arm capacitance C for T and π section of HPF ? L = 0.0132 mH, C = 0.0132 μF. L = 3.316 mH, C = 0.0132 μF. None of these. L = 3.316 mH, C = 132 μF. L = 0.0132 mH, C = 0.0132 μF. L = 3.316 mH, C = 0.0132 μF. None of these. L = 3.316 mH, C = 132 μF. ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS