Electric Circuits A current of 4 A flows in an ac circuit when 100 V dc is applied to it whereas it takes 250 v ac to produce the same current the power factor of the circuit is 1. 10. 0.85. 0.4. 1. 10. 0.85. 0.4. ANSWER DOWNLOAD EXAMIANS APP
Electric Circuits A load is connected to an active network. At the terminals to which the load is connected, RTH = 10 Ohm, VTH = 60V. Then maximum power supplied to the load is 60W. 180W. 360W. 90W. 60W. 180W. 360W. 90W. ANSWER DOWNLOAD EXAMIANS APP
Electric Circuits A wire 2.5 m long is bent into a square. An current of 100 A flowing through the wire will produce a magnetizing force at the center of the square, equal to 222 AT / m. 196 AT / m. 72 AT / m. 144 AT / m. 222 AT / m. 196 AT / m. 72 AT / m. 144 AT / m. ANSWER DOWNLOAD EXAMIANS APP
Electric Circuits Which of the following is not equivalent to watts? Ampere-volts. Ampere2 – Ohm. Amperes/volt. Joules per second. Ampere-volts. Ampere2 – Ohm. Amperes/volt. Joules per second. ANSWER DOWNLOAD EXAMIANS APP
Electric Circuits Which of the following are the passive elements? Resistor None of these. Both Bulb Resistor None of these. Both Bulb ANSWER DOWNLOAD EXAMIANS APP
Electric Circuits If the peak value of a sine wave is 100 V, then its RMS value will be 70.7 V. 100 V. 88 V. 63.6 V. 70.7 V. 100 V. 88 V. 63.6 V. ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS