Power Systems A cable has the following characteristics, L = 0.201 µH/m and C = 196.2 pF/m. The velocity of wave propagation through cable is 159.24 m/µs 32 m/s 159.24 m/s 0.0312 m/s 159.24 m/µs 32 m/s 159.24 m/s 0.0312 m/s ANSWER DOWNLOAD EXAMIANS APP
Power Systems Which of the following is/are the stator faults? Inter phase faults All of these over current failure of excitation Inter phase faults All of these over current failure of excitation ANSWER DOWNLOAD EXAMIANS APP
Power Systems Consider a long, two wire line composed of solid round conductors. The radius of both conductors is 0.25 cm and distance between their centers is 100 cm. If this distance is doubled, then the inductance per unit length. Decrease but does not halves. Increase but does not doubled. Halves. Doubled. Decrease but does not halves. Increase but does not doubled. Halves. Doubled. ANSWER DOWNLOAD EXAMIANS APP
Power Systems In boiler water reactor (BWR) all of above. there is danger of radioactive contamination of steam. enriched uranium is used as fuel. the feed water acts both coolant and a moderator. all of above. there is danger of radioactive contamination of steam. enriched uranium is used as fuel. the feed water acts both coolant and a moderator. ANSWER DOWNLOAD EXAMIANS APP
Power Systems Consider a three phase, 50 Hz, 11 kV distribution system. Each of the conductors is suspended by an insulator string having two identical porcelain insulators. The self capacitance of the insulators is 5 times the shunt capacitance between the link and ground. Find the voltage across the two insulators V1 and V2? (V1 = Voltage of disc nearest to the conductor) V1 = 2.89 kV and V2 = 3.46 kV V1 = 5 kV and V2 = 6 kV V1 = 6 kV and V2 = 5 kV V1 = 3.46 kV and V2 = 2.89 kV V1 = 2.89 kV and V2 = 3.46 kV V1 = 5 kV and V2 = 6 kV V1 = 6 kV and V2 = 5 kV V1 = 3.46 kV and V2 = 2.89 kV ANSWER DOWNLOAD EXAMIANS APP
Power Systems Capacitance voltage transformer ( CVT ) is used to none of these. improve the power factor of the transmission. reduce losses in a transmission line. connect instruments on the LT side. none of these. improve the power factor of the transmission. reduce losses in a transmission line. connect instruments on the LT side. ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS