Electrical Machines A 6 pole lap connected DC generator with 480 conductors has armature resistance of 0.06 Ω. If the conductors are reconnected to from a wave winding other things remaining unchanged, the value of armature resistance will be 0.54 Ω. 0.01 Ω. 0.06 Ω. 0.54 Ω. 0.54 Ω. 0.01 Ω. 0.06 Ω. 0.54 Ω. ANSWER DOWNLOAD EXAMIANS APP
Electrical Machines When the armature current of 5 Amp is flowing through the dc motor the torque produced is 47 Nm. Keeping the speed constant if the armature current is increased to 7 amp, calculate the new torque. Assume losses to be constant. 74 Nm. 38.5 Nm. 27.73 Nm . 65.8 Nm. 74 Nm. 38.5 Nm. 27.73 Nm . 65.8 Nm. ANSWER DOWNLOAD EXAMIANS APP
Electrical Machines The short circuit test on a transformer is conducted to obtain eddy current loss. core loses only. copper losses. hysteresis loss. eddy current loss. core loses only. copper losses. hysteresis loss. ANSWER DOWNLOAD EXAMIANS APP
Electrical Machines Maximum power developed by a synchronous motor depends on supply voltage and load angle supply voltage and excitation excitation and load angle supply voltage, load angle and excitation supply voltage and load angle supply voltage and excitation excitation and load angle supply voltage, load angle and excitation ANSWER DOWNLOAD EXAMIANS APP
Electrical Machines In DC generator, brushes are always placed along load axis. geometrical neutral axis. magnetic neutral axis. armature axis. load axis. geometrical neutral axis. magnetic neutral axis. armature axis. ANSWER DOWNLOAD EXAMIANS APP
Electrical Machines Field weakening control method is used for the _________ ? both A and B below rated speed above rated speed None of these both A and B below rated speed above rated speed None of these ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS