Measurement and Instrumentation A 1 mA meter is to be converted to 1 A ammeter. The meter resistance is 100 Ω. The value of shunt resistance 1000 Ω. 100 Ω. 0.1001 Ω. 0.001 Ω. 1000 Ω. 100 Ω. 0.1001 Ω. 0.001 Ω. ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation In a wheatstone bridge, a change of 6 Ω in the unknown arm of bridge is required to produce a change in deflection of 2.4 mm of the galvanometer. The sensitivity is 0.8 mm/Ω 5.0 mm/Ω 0.4 mm/Ω 2.5 mm/Ω 0.8 mm/Ω 5.0 mm/Ω 0.4 mm/Ω 2.5 mm/Ω ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation To measure 5 volts, if one selects a 0-100 volt range voltmeter which is accurate with in ± 1%, then the error in this measurement may be up to ± 20% ± 2.5% ± 1.5% ± 7.5 % ± 20% ± 2.5% ± 1.5% ± 7.5 % ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation An induction wattmeter can be used for Any of the listed here Dc only Ac only Both DC and AC Any of the listed here Dc only Ac only Both DC and AC ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation A DC A-h meter is rated for 15 A, 250 V. The meter constant is 14.4 A-sec/rev. The meter constant at rated voltage may be expressed as 960 rev/KWh. 3600 rev/KWh. 3750 rev/KWh. 1000 rev/KWh. 960 rev/KWh. 3600 rev/KWh. 3750 rev/KWh. 1000 rev/KWh. ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation The resistance of a circuit is measured from the relation R= P/I2, where P is the power fed into the circuit and I is the current flowing through it. If the limiting errors in the measurement of power and current are respectively ± 1.0% and ± 1.0%, then what will be the limiting error in measurement of resistance ? ± 3.0% ± 1.5% ±3.5% ±0.5% ± 3.0% ± 1.5% ±3.5% ±0.5% ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS